Vi tæller ned til Black Friday| Altid gode tilbud hos din 3D printer specialist | 3D Eksperten

3DE MAX - Shadow Grey / Slate Grey - 1.75mm

 

OBS: Slate grey skifter navn til Shadow Grey - men beholder den samme farvekode. Du kan derfor opleve at få en rulle med navnet shadow grey i stedet for slate grey. 

3DE Max er et nyt materiale, som er kendt for sin ekstreme styrke

1 kg

3DE Max PLA er et 3D printer materiale, som har store mekaniske fordele samt print kvalitet. 3DE MAX har en slagfasthed på på til 7 gange bedre end almindleigt PLA og bedre mekaniske fordele end ABS og PETG.

På lager
SKU
200104
179,95 kr 143,96 kr

Hos 3D Eksperten får du;

✦ Professionel kundeservice

✦ Dag-Til-Dag levering på lagervarer

✦ Kundeservice på +45 29 87 09 66

✦ Pengene retur for ubrugte varer i original emballage

✦ Stort udvalg af 3dprintere og tilbehør

 

 

  

 
Toughness is a priority : Regular PLA is a pretty brittle material, which greatly limits its range of applications. 3DE MAX PLA has been made to change this.

Featuring increased impact strength of up to 9 times that of regular PLA and 20% more tough than ABS, 3DE MAX PLA is a sure winner when it comes to toughness.

So if you are looking for a material that can withstand your mechanically demanding tasks, 3DE MAX is up for the challenge.

 

 

High Quality : The high mechanical strength of 3DE Premium is achieved with no compromise in printing quality. As 3DE MAX is also produced with Jam-Free technology

With 3DE MAX you can be certain you will get high quality prints with excellent strength while still enjoying the ease of printing PLA.

 

 

An alternative to ABS : Still printing ABS while trying to endure the odour and potential health risk? With 3DE MAX you can get rid of that potentially hazardous ABS

and still achieve the same structural strength with even more benefits such better printer compatibility, easier printing, less warping, no hazardous odours, and in many cases

even better mechanical properties - though not as flexible as the ABS. If you need the flexibilities from ABS we recommend you take a closer look on the 3DE PETG Materials.

 

Material Specs

Glass Transition Temp
~ 60 °C

Density
1.17 – 1.24 g/cm3

Diameters
1.75 mm or 2.85 mm

Tolerance
± 0.05 mm
50 Microns
(Typical~ ± 0.02 mm )

SPOOL

The spool on 3de MAX is transparent with an indicator of used filament on the side.

 

---

 

Recommended 3D printing temperature
190 – 220 °C (Diameter of 1.75mm)

Recommended 3D print speed
40 – 150 mm/s

Recommended heated bed temperature
Not Required - but recommended

Build platform
All our products work well with common build plate surfaces such as the blue tape, Kapton tape, glass, etc. However for the best user experience, we recommend that you use our materials with a SpiderSheet which is a build plate surface designed specifically for desktop FDM/FFF printers.

 

 

Skriv din egen anmeldelse
Du anmelder:3DE MAX - Shadow Grey / Slate Grey - 1.75mm
Din bedømmelse

Bestil retur fragt her

Her kan du bestille en GLS Returforsendelse til 3D Eksperten hvis du har fortrudt dit køb.

Prisen er 50,- pr. pakke og må veje op til 15kg pr. pakke.