MICRO USB 1A TP4056 LITHIUM BATTERI LADER + PROTECTION

MICRO USB 1A TP4056 LITHIUM BATTERI LADER + PROTECTION
Udsolgt
SKU
7897
14,00 kr 11,20 kr

Hos 3D Eksperten får du;

✦ Professionel kundeservice

✦ Dag-Til-Dag levering på lagervarer

✦ Kundeservice på +45 29 87 09 66

✦ Pengene retur for ubrugte varer i original emballage

✦ Stort udvalg af 3dprintere og tilbehør

 

 

  

Module Applications This module is used for single-cell lithium or lithium multi-section parallel, charging ports can take power from USB. Instructions / Precautions Test current meter in series with the charge sheet only 5V input. Charge current is best battery capacity 0.37C, is 0.37 times the capacity, meaning that a 1000mAH battery must be charged at 400 mA. Do not use too small or too long charging connector wires. Ensure good contact to the battery. If the 5V input voltage is high, such as 5.2 or even 5.5, will result in insufficient charging current is 1000mA, this is normal. Chip temperature will automatically reduce the charging current, to protect the chip from burning out. Chip will get hot (60 degrees is normal).
Skriv din egen anmeldelse
Du anmelder:MICRO USB 1A TP4056 LITHIUM BATTERI LADER + PROTECTION
Din bedømmelse

Bestil retur fragt her

Her kan du bestille en GLS Returforsendelse til 3D Eksperten hvis du har fortrudt dit køb.

Prisen er 50,- pr. pakke og må veje op til 15kg pr. pakke.