3D Eksperten | Gratis fragt til GLS Pakkeshops ved bestilling over 399,95 kr. | Din 3D printer specialist

PrimaFil PEI Ultem Sheet 305x305mm-0.5mm

PEI Ultem (Polyetherimide) from Prima Filaments is a reusable, relatively maintenance free, build surface for both ABS (with a Heated bed) and PLA (hot or cold), other materials such as Metal, Wood, PETG, ABS+ and many others also works just fine. You don’t require any additional adhesives such as glue or tape. PEI is appealing due to its "no-surface-prep" conditions, which make it convenient to work with. Additionally, printing on PEI requires no support rafts as parts adhere directly to the surface with no issue.

Kun 1 tilbage
SKU
406000
290,00 kr 232,00 kr

Hos 3D Eksperten får du;

✦ Fri fragt ved køb over 399,-

✦ Professionel kundeservice

✦ Stort udvalg af 3dprintere og tilbehør

✦ Prismatch fra danske forhandlere

✦ Dag-Til-Dag levering på lagervarer

✦ Pengene retur for ubrugte varer i original emballage

✦ 4,8 stjerner på Trustpilot

   

 

  

 

How To Use.
PEI is easily cut to size by scoring with a hobby knife. Once you have laminated your sheet of PEI onto your glass, simply re-level your print bed and print away. Parts should come free from the surface with almost no issue at all. PLA does not require heat, but turning the heated bed up to 45C helps. After the print is done, just let the plate cool down and then gently you can just “pop” the model off the plate.
Before each print, wipe your PEI surface down with 70-91% Isopropyl alcohol, to ensure that you wipe away any grease or other residues that may have accumulated on the surface. This will help increase your surface adhesion greatly.
Use acetone, isopropyl alcohol, methyl alcohol, or soap to clean your PEI after use.

Skriv din egen anmeldelse
Du anmelder:PrimaFil PEI Ultem Sheet 305x305mm-0.5mm
Din bedømmelse

Bestil retur fragt her

Her kan du bestille en GLS Returforsendelse til 3D Eksperten hvis du har fortrudt dit køb.

Prisen er 50,- pr. pakke og må veje op til 15kg pr. pakke.