PrimaSelect - PLA METAL - Bronze - 1.75mm
Material: Metal Diameter: 1.75mm Tolerance: ± 0.05 mm Heated build platform required: Recommended Print Temperature: 210 - 235 °C Melting Temperature: 150 °C ± 10°C Weight Filament: 750 g Spool Size: 200 x 55 mm Spool Hub Diameter: 53mm
Kun 4 tilbage
375,00 kr 300,00 kr
PrimaSELECT Metal is a new exciting type of fi lament which let you take 3D-printing to a new level. In this new material we have introduced a filament that contains 80% metal powder! Needless to say, this material is as close to real metalas you can come in the filament industry for FDM/FFF printers. SELECT Metal is available in Bronze and Copper. There´s many benefi ts by using metal powder. You will experience a real metal feel when you touch it and it also have that cold feeling that you can have when you touch copper or bronze. When it comes to weight SELECT Bronze/Copper is about 3-4 times heavier than regular PLA which also enhances the feeling of real metal. Thanks to the metal powder there´s also very low shrinkage when printing with this filament You can use SELCT Bronze/Copper in almost any FDM printer on the market today and the filament has been tested in a number of di erent set ups with both Bowden and direct drive printers. Due to the abrasive nature of metal we recommend that you use a hardened steel nozzle* with this filament. It prints great with a regular brass nozzle also but the wear and tear is bigger and the risk for wearing out your nozzle increases. Why should I use PrimaSELECT Metal? Easy to print Contains 80% real metal for a genuine look and feel Works on most 3d-printers PLA based Easy to polish and post process Can print with retraction INFORMATION: SELECT Bronze/Copper works great without a heated bed, but if you have it we recommend a setting of 35-60 °C Post processing is really fun with this filament as you can make it look just like a cast molded model. When the print is done it is looks almost like clay, but then you can use some techniques to bring out that metal gloss. A rotary tumbler is the easiest way of handling the fi nished print. You can just tumble it for a few hours or until you have the fi nish you are looking for. You can also use some fi ne grit sand paper (600) and polish your print to desired fi nish. Polish the model with sand paper and water. The longer you polish, the better the shine. You can finish with some metal polish for that perfect look. PrimaSELECTMetal sticks on BuildTak or glass plate coated with adhesive spray or glue stick. PrimaSELECTMetal is reeled on a transparent spool with 750 g of high quality filament. It´s packed in a sturdy box and packed with silica gel to avoid moister. PrimaSELECTMetal are available in diameter sizes of 1.75 mm and 2.85 mm. Our state of the art factory is equipped with the latest in laser measuring technology to ensure that you will receive a spool of filament with a very tight diameter and roundness tolerance. This in turn makes for a filament that is compatible with most common printers on the market today.
Skriv din egen anmeldelse