Vi tæller ned til Black Friday| Altid gode tilbud hos din 3D printer specialist | 3D Eksperten

Ramps 1.4 Fan Extender

Infor:Want to connect a firmware controlled FAN to RAMPS board directly when you build or upgrade your printer with/to DUAL-EXTRUSION (2 extruder) including a heated bed, but found that all the output ports (D8,D9,D10) will be used?

The RRD-FAN-EXTENDER is exactly what you need in this case. It is a plug and play solution to mount the FAN for DUAL-EXTRUSION setups with RAMPS1.4. But instead of adding only one additional output port the RRD-FAN-EXTENDER is equipped with 2 PWM controllabe channels(D6/D11). The second channel can be used for another fan(e.g. to cool the stepper driver) or for adding light control (e.g. add dimmable LED light to your machine).

På lager
SKU
500621
79,00 kr 63,20 kr

Hos 3D Eksperten får du;

✦ Professionel kundeservice

✦ Dag-Til-Dag levering på lagervarer

✦ Kundeservice på +45 29 87 09 66

✦ Pengene retur for ubrugte varer i original emballage

✦ Stort udvalg af 3dprintere og tilbehør

 

 

  

Features:

Max 20V

2 (PWM controllable) channels (D6/D11)

Max 0.5A per channel (enough for a really big fan)

Flexible output voltage (you can connect the RRD-FAN-EXTENDER to 12V,5V,... in order to support The output voltage you need)

Each channel has a fly back diode

Easy setup (plug and play)

Supported by Marlin firmware (choose "#define MOTHERBOARD 34")

Easy to adapapt to other firmware (e.g. Sprinter: just change "#define FAN_PIN 6" in "pins.h")

Skriv din egen anmeldelse
Du anmelder:Ramps 1.4 Fan Extender
Din bedømmelse

Bestil retur fragt her

Her kan du bestille en GLS Returforsendelse til 3D Eksperten hvis du har fortrudt dit køb.

Prisen er 50,- pr. pakke og må veje op til 15kg pr. pakke.