MODEL | MDX-540 | MDX-540S |
---|---|---|
Usable Materials | Plastic, resin, wood and non-ferrous metals | |
XYZ-Axis Travel | 19.6(X) x 15.7(Y) x 6.1"(Z)[500 (X) x 400 (Y) x 155 mm (Z)] | |
Loadable workpiece size with optional rotary axis (ZCL-540) * | 7.0” Diameter x 14.6” Length [177.8mm Diameter x 370.8mm Length] Actual milling area is smaller |
|
Distance From Spindle Nose to Table | Maximum 10" (254mm) | |
Table Size | 21.7(W) x 16.5"(D) [550(W) x 420mm (D)] | |
Loadable workpiece weight | At acceleration of 0.2G: maximum 26lb (12kg), 0.1G: 44lb (20kg), 0.05G: 44lb (20kg) | |
XYZ-axis drive system | AC servo motor, 60W | AC servo motor, 80W |
Operating speed | Maximum 295ipm (7.5m/min) | |
Acceleration | 0.2G, 0.1G, 0.05G | |
Software resolution | RML-1 mode: 0.0004"(0.01mm ), NC-code mode: 0.00004" (0.001mm) | |
Mechanical resolution | 0.00004” (0.001mm) | |
Positioning accuracy | +/-0.004"/12"(+/-0.1mm/300mm), under no-load conditions | |
Repeat accuracy | +/-0.0019"(+/-0.05mm), under no-load conditions | +/-0.0008"(+/-0.02mm), under no-load conditions |
Origin reproducibility (when the power is switched on/off) | +/-0.0019" (+/-0.05mm) | +/-0.0008" (+/-0.02m) |
Spindle motor | DC brushless motor, maximum 400W | |
Spindle speed | 400 to 12,000 rpm; 400 to 3,000 rpm for positioning and centering | |
Tool chuck | Collet method, maximum tool diameter: 0.4" (10mm) | |
Control command sets | RML-1 and NC codes | |
Interface | USB (compliant with Universal Serial Bus Specification Revision 1.1) | |
Power supply | Voltage and frequency: AC 100 to 120 V/220 to 240 V +/-10%, 50/60 Hz Required power capacity: 7A (100 to 120V)/4A (220 to 240V) |
|
Power consumption | Approx. 700W | |
Acoustic noise level | During operation (no cutting): 65dB (A) or less, during standby: 40dB (A) or less (according to ISO 7779) | |
Dimensions | Width x depth x height: 29.3 x 37.6 x 33.8Z" (745 x 955 x 858mm) | Width x depth x height: 30.1 x 37.6 x 33.8Z" (765 x 955 x 858mm) |
Weight | 225lb (102kg) | |
Operating temperature | 41 to 104F (5 to 40C) | |
Operating humidity | 35 to 80% (no condensation) | |
Included items | Handy panel, power cord, tool sensor, sensor cable, nut, nut wrench, wrench, hexagonal wrenches, Roland Software CD-ROM, SRP Player CD-ROM, User's Manual, Roland Software Guide, SRP Player Installation and Setup Guide, and NC Code Reference Manual |
Roland MDX-540
Roland MDX-540
Advanceret teknologi - produktionsegnet
En 4-akset CNC maskine, der uden tvivl vil leve op til de flestes behov. Denne maskine kan nemt og hurtigt fremstille alt lige fra prototyper eller vil kunne indgå i en reel produktion. Med en uhyre høj hastighed og præcision vil man kunne lave emner der kan bruges indenfor flere brancher såsom støberi, smykkedesign eller elektronik branchen.
En roterende akse fås som ekstraudstyr til at håndtere større emner.
Her kan du bestille en GLS Returforsendelse til 3D Eksperten hvis du har fortrudt dit køb.
Prisen er 50,- pr. pakke og må veje op til 15kg pr. pakke.