Taulman 645 Nylon - 2.85mm
Information fra producent
taulman 645 Technical Specifications:
Type = 645 Nylon Co-Polymer consists of the purest form of a delta transition of Nylon 6/9, Nylon 6 and Nylon 6T with a crystallinity optimization process in addition to post processing for maximum bonding during a thermal transition (3D Printing).
Construction = From granule form through nylon extruding systems to a 12 station extrusion to draw, 4 chiller loops with 2 post processing stations to a final draw of 3mm or 1.75mm round line.
Physical Properties Metric English Comments
Water Absorption 3.09 % 3.09 % ISO METHOD 62
Mechanical Properties Metric English Comments
Tensile Strength, Yield 12,428 psi ISO METHOD 527
Elongation at Break >= 300 % >= 300 % ISO METHOD 527
Thermal Properties Metric English Comments
Melting Point 214 °C 417 °F ISO METHOD 3146C
Glass Transition Temp 68.2°C.
Processing Properties Metric
Print Temperature 235 - 260 °C - Part and printer dependent.
Pyrolysis 350 - 360 °C
UV There are no UV Inhibitors within 645 as they reduce bonding
Safety 645 meets the EU's "REACH" requirements as defined by the ECHA European Chemicals Agency. There are NO additives or chemicals in 645 that are listed in the REACH Directive.
645 Contains NO toxic chemicals and is "inert" to the body.
As with all 3D Printing using heated polymers, Caution should be used so as NOT to come into
contact with the molten 645 (214C+) as it will adhere to ALL cellulose surfaces, including skin.