-25.01%

Venom Grey - SpiderFilament PLA - 1.75mm

Filament i høj kvalitet, specielt udviklet til SpiderMakeren!

Pantone: Slate Gray P170-15 U

  • Prints around 195-205C
  • Heatbed not required - 60C if possible

 

På lager
SKU
201901
Tilbudspris 149,95 kr 119,96 kr Normalpris 199,95 kr

Hos 3D Eksperten får du;

✦ Professionel kundeservice

✦ Dag-Til-Dag levering på lagervarer

✦ Kundeservice på +45 29 87 09 66

✦ Pengene retur for ubrugte varer i original emballage

✦ Stort udvalg af 3dprintere og tilbehør

 

 

  

SpiderFilament PLA is a very good everyday PLA 3dprint material. It is a non-toxic filament and has no unpleasant smell while being printed. The spool is black and simple – a simple clean design!

Polyactic Acid (PLA) is a bio-degradable polymer which is produced from lactic acid – it’s made from corn or other ecofriendly biomaterial. SpiderFilament will print good between 190C-210C and is an easy PLA to print.

It can be printed with a cold bed but we recommend around 45-60C on the bed to ensure a good first layer bonding. We recommend SpiderFiament for all kind of jobs – you will often see that the new SpiderFilament will do much better than other materials – this is because we use a new formular mix in the production which means that the strenght of the filament and final print is much higher than many other PLA filaments.

You can use the SpiderFilament on acrylic, glass, alu, PEI sheet, PC sheet, Kapton, 3M Tape and many other materials – with or without glue or other adhesive spray glue.

All the SpiderFilament spools is packed with 1kg material and weighs around 1.4kg in total (with spool). All spools are vacuum packed with silica gel to aviod moister which is a killer for all filaments.

SpiderFilament comes in 1.75mm to ensure that all normal types of 3dprinters can use our filament.

We ensure a perfect roundness and tight diameter control of the filament – this will ensure that you will recieve a good quality filament for your 3dprinter. SpiderFilament is one of the best selling 3dprinter filament in our store.

We are known all over the world for our low price and high quality. We recommend SpiderFilament because;

* Very easy to print – even at a low temperature.

* A low warping filament

* It’s eco-friendly

* No unpleasant smells or particles

 

 

MANUFACTURER: SpiderFilament

MATERIAL PLA

DIAMETER 1.75 mm

TOLERANCE ± 0.05 mm

HEATED BUILD PLATFORM REQUIRED: No

PRINT TEMPERATURE: 190°C - 210°C

WEIGHT FILAMENT: 1000 g

SPOOL SIZE: 200 mm x 55 mm

SPOOL HUB DIAMETER: 53 mm  

Skriv din egen anmeldelse
Du anmelder:Venom Grey - SpiderFilament PLA - 1.75mm
Din bedømmelse

Bestil retur fragt her

Her kan du bestille en GLS Returforsendelse til 3D Eksperten hvis du har fortrudt dit køb.

Prisen er 50,- pr. pakke og må veje op til 15kg pr. pakke.