Wanhao Duplicator 4S (Dual)
3D Eksperten prisgaranti! Vi matcher alle danske forhandlere på alt fra Wanhao.
Denne Duplicator 4S - er en af de bedre 3d printere, mere stabil samt billigere i reservedele!
Nyeste model af Wanhao Duplicator serien.
Software, manual, trin-for-trin guide medfølger på SD kort.
Anbefalet til private, skoler- og andre uddannelsesinstitutioner, begyndere og advanceret brugere.
ReplicatorG Software medfølger -, Simplify3D, Makerware mfl. Simplify3D (KØBESOFTWARE) Anbefales af 3D Eksperten for bedre print og brugervenlighed.,
Printer i alle materialer (1.75mm)
|PRINT TECHNOLOGY||FFF Fused Filament Fabrication|
|EXTRUDERS||2 Dual Extruders|
|INTERFACE||Print with SD Card or direct via USB Port|
|MAX PRINTING OBJECT SIZE/BUILD VOLUME||225 * 145 * 150mm, ca 5 l|
|LAYER RESOLUTION||0.1mm -0.5mm (100 micron)|
|POSITIONING PRECISION||Z-Axis 2.5 micron, XY Axis 11 micron|
|LCD DISPLAY||4x20 LCD character display and multi-direction control pad|
|EXTRUSION TEMPERATURE||Recommended Maximum 230 C|
|PLATFORM TEMPERATURE||Heated Build Platform 120 C Maximum|
|MATERIAL TYPE||Prints ABS, PLA, PET, Nylon, Laywoo-D3, LayBrick, BendLay|
|FILAMENT SIZE||1.75+-0.1mm Wire|
|CONNECTIVITY||USB, SD Card slot|
|CHASSIS||Black DPP (Dense Plastic Plate) Very durable|
Her er den nyeste model af Duplicator 4 familien - den helt nye Wanhao Duplicator 4s.
Dette er den seneste opdateret model, i Duplicator 4 serien og er virkelig en god og alsidig printer, der dækker de flestes behov. Den kommer i et flot sort metal kabinet, der sikrer din printer mod vibrationer. Denne model kommer med en opvarmet byggeflade (heated bed) og et lukket print område, der giver et godt klima for print med f.eks. ABS filament.
Denne printer er udstyret med den nyeste MK10 Dual-Extruder. Dette betyder at du man printe med flere forskellige farver, eller eventuelt udnytte at man har muligheden for at printe med HIPS eller PVA, som supportmateriale.
Nedenstående er information fra producent
ReplicatorG is included.
• Extruder: New! MK10 Dual-Extruders
• Filament Size: 1.75mm Dedicated
• Layer Capability: 0.1mm - 0.5mm
• Build Envelope: 225mm x 145mm x 150mm
• Filament Capabilities: ABS, PLA, PVA, NYLON, HIPS and other common filaments.
• Software: ReplicatorG (Opensource)
• Frame Color: Black Steel Exoframe
• Heated build plate
The Duplicator 4s has our latest dedicated 1.75 mm filament extruder. This extruder was designed from scratch, and contains a number of custom manufactured parts. We’ve learned a lot over our past extruder designs, and incorporated a lot of those lessons here: that’s why it’s smaller, lighter, and faster to build. And since it’s designed from the ground up for 1.75 mm filament, it’s light-years ahead of past designs in small-filament reliability.
The layer alignment is much better which results in nicer prints and higher resolution, 100 micron inch. We’ve completely overhauled the drive system to give the optimum positioning accuracy. The entire system has been upgraded to sturdy 3/8″ diameter linear shafting. This is probably overkill, but you can trust that the axes will be sturdy. We’ve also switched to self-aligning, sintered stainless steel bearings. These are very forgiving to DIY assembly and provide a nice, smooth motion on the steel shafts. We’ve completely replaced the Z axis with a stepper driver, centilevered stage. Guided by two of the linear shafts, this completely eliminates any Z wobble and results in nicely aligned layers. Using a high-angle lead screw, we were able to increase the speed of the Z axis from 150mm/minute to 1,000mm/minute. This means the layer changes are almost completely imperceptible.
Connect over USB and hit print — the machine will calibrate itself and start printing. The new electronics have been designed to make the printing experience easier than ever. The Duplicator 4s connects to your computer via a standard USB cable thanks to a USB chip on the motherboard. We’ve also added full end stop support so that you never need to touch the XYZ axes ever again. When you hit print, the machine will automatically home itself, heat up, and begin printing. All you have to do is sit back and relax while your Duplicator 4s does all the work. Living in the future is awesome. Oh yeah, and the electronics are all inside, so you don’t have wires dangling everywhere.e.
Or you can print with SD card. Sometimes customer failed in printing with computer USB link, due to the computer sleep or shut down automatically. For this reason, we developed SD card reader on printer. Awesome, all your printer job can be done by this small card. 2Gb card is sufficient for any 3D file and keep as many file as you like. Simple and fast is our mission.