1pcs DUEX5 expansion board and some plugs and jumpers.

DescriptionThe Duex5 has the following features:

•     5 additional TMC2660 stepper motor drivers with stall notification
•     5 additional extruder heater outputs
•     5 servo outputs with 5V power and 5V signal levels, sharing control channels with the heaters, so you can use unused heater channels to drive servos
•     5 additional endstop inputs with indicator LEDs and 3.3V/5V voltage selection. These are also usable as outputs
•     6 additional controlled fan outputs, also usable for driving LEDs etc. The output voltage may be switched between 5V, 12V and VIN
•     4 uncommitted general purpose I/O pins
•     12V switching regulator, for generating a 12V supply for fans, LEDs etc. when the VIN power is higher than 12V
•     5 additional thermistor inputs
•     Support for 2 more thermocouple or PT100 daughter boards, supporting up to 4 more sensors
•     Optional 5V external power input for powering servos, fans etc.

1pcs DUEX5 expansion board and some plugs and jumpers.

DescriptionThe Duex5 has the following features:

•     5 additional TMC2660 stepper motor drivers with stall notification
•     5 additional extruder heater outputs
•     5 servo outputs with 5V power and 5V signal levels, sharing control channels with the heaters, so you can use unused heater channels to drive servos
•     5 additional endstop inputs with indicator LEDs and 3.3V/5V voltage selection. These are also usable as outputs
•     6 additional controlled fan outputs, also usable for driving LEDs etc. The output voltage may be switched between 5V, 12V and VIN
•     4 uncommitted general purpose I/O pins
•     12V switching regulator, for generating a 12V supply for fans, LEDs etc. when the VIN power is higher than 12V
•     5 additional thermistor inputs
•     Support for 2 more thermocouple or PT100 daughter boards, supporting up to 4 more sensors
•     Optional 5V external power input for powering servos, fans etc.