For Ultimaker 2 & Ultimaker 2 Extended

Upgrade your Ultimaker 2 with Ultimaker 2+ tech

Enjoy Ultimaker 2+ features including a geared feeder, a swappable nozzle and new

fans caps

making your prints the best ever. It takes under an hour to assemble the kit using our easy-

to follow install videos.

Installation guide

When linking to the installation guide you can use this text:

●

Step-

-step installation guide

●

Our simple step-

-step guide will help you assemble the upgrade in under an hour

What

’

s included content

When informing users about what

s included in the kit you can use the below texts. These texts can b

accompanied by the

what

s included

product image that has corresponding numbers.

●

Title: What

s in the kit

●

Description: Everything you need to assemble the upgrade is in the

box. There are no special

tools needed and you

ll be finished in an hour.

Fully assembled print head

○

The print head comes fully assembled with all parts and wires in place. The new

fancaps

ensure the airflow is aimed perfectly below the nozzle and equally from both si

des and

the new Sunon fans are more silent than ever. The heater cartridge is now 35W whi

improves heat up times and print speeds. The PTFE isolator is made from TFM,

which

has a longer life span. We've removed the spring and implemented a spacer, this p

uts

less pressure on the PTFE isolator which also expands its life span. We're using

a new

sensitive PT-100 temperature sensor, it provides accurate readings so you can t

weak the

settings with precision.

Swappable nozzles

○

Thanks to the swappable nozzle, you can quickly switch between different noz

zles. The

standard nozzle size is 0.4 mm, but you also have the option to

use a 0.25 mm nozzle for

detailed prints or a 0.6 mm/0.8 mm for faster prints.

Geared feeder motor

○

A new geared feeder motor is included that connects to the geared feeder.

Geared feeder

○

The innovative feeder allows you to easily swap filament and choose the c

orrect

pressure for your filament. For example with a softer filament you

ll need to choose a

lower pressure. Such control increases the success rate of your prints. It also feat

ures a

lever which, when raised, lets you manually insert or remove filament.

Print head shafts

○

New print head shafts are included, just in case you

ll bend your current print head

shafts while removing the print head.

Ultimaker calibration card

○

A calibration card is included to level the build plate to the co

rrect height.

Filament reel holder

○

To save desktop space, a shorter filament reel holder is included.

Axis tools

○

The axis tools are included to correctly remove and insert the print head shaft

s. The axis

alignment tools are included to properly align the print head shafts for as

little friction

as possible.

Build plate clamps

○

New build plate clamps are included that are much easier to open and close

by hand.

This allows you to easily remove the glass plate for cleaning or access to a p

rint.

10.

stickers

○

The final touch in transforming your Ultimaker 2 to an Ultimaker 2+